Open Access Journal

Manuscript submission

Volume 43 (1992), issue 2

Research in the application of front milling to the processing of plain surfaces

Research subject and fields:

The paper deals with the possibility of applying front milling in processing of plain surfaces. The front milling process has been studied on a Rotoles 130 2V milling machine. During the tests cutting force, feed speed and workpiece height before and after milling were measured. Consequently the influence of the feed -speed on the cutting force and the specific cutting energy was determined. The relationship between the workpiece height deviation and the feed speed, and the surface roughness and the feed speed have also been determined.


Faculty of Forestry and Wood Technology

DRVNA INDUSTRIJA Scientific Journal of Wood Technology

ISSN 0012-6772 (Print) / ISSN 1847-1153 (Online)

Faculty of Forestry and Wood Technology University of Zagreb, Svetošimunska 25, 10000 Zagreb, Hrvatska - Croatia
Tel: +3851 2352 430, E-mail:
Editor-in-Chief: Prof. Ružica Beljo-Lučić, Ph.D. E-mail:
Cookie settings