Open Access Journal

Manuscript submission

Volume 68 (2017), issue 1
Title:

Determination of Screw Withdrawal Resistance of Some Heat-Treated Wood Species

Research subject and fields:
Abstract:

In this study, the screw withdrawal resistance of heat-treated hornbeam (Carpinus betulus L.), black pine (Pinus nigra Arnold) and Uludağ fir (Abies bornmuellerinana Mattf.) was determined according to the ASTM D 1761 standard. For this purpose, wood materials were heat treated at 150, 170, 190 and 210 °C for 3 h. After the heat treatment, the screw withdrawal resistance of the wood was determined in radial, tangential and transverse directions. As a result, the screw withdrawal resistance values decreased with increasing heat treatment temperature and the lowest resistance was obtained in the wood heat-treated at 210 °C. In terms of wood species, the highest screw withdrawal resistance was found in hornbeam (Carpinus betulus L.), while the lowest value was observed in black pine (Pinus nigra Arnold). Additionally, in terms of the cross-sectional direction, the highest screw withdrawal resistance was determined in the tangential direction, while the lowest resistance value was observed in the transverse direction.

Publisher

Faculty of Forestry and Wood Technology
HRCAK
ORCID
DOI
CROSSREF

DRVNA INDUSTRIJA Scientific Journal of Wood Technology

ISSN 0012-6772 (Print) / ISSN 1847-1153 (Online)

Faculty of Forestry and Wood Technology University of Zagreb, Svetošimunska 25, 10000 Zagreb, Hrvatska - Croatia
Tel: +3851 2352 430, E-mail: drind@sumfak.hr
Editor-in-Chief: Prof. Ružica Beljo-Lučić, Ph.D. E-mail: editordi@sumfak.hr