Archive

Volume 75 (2024), Issue 1

Water Permeability and Adhesion Strength of Bio-based Coating Applied on Wood

Authors:

Dimitar Angelski, Krasimira Atanasova

Keywords:

water permeability; adhesion strength; bio-based coating; beech; spruce

Volume 74 (2023), Issue 4

Modeling of Color Design on Furniture Surfaces with CNC Laser Modification

Authors:

Cebrail Açιk

Keywords:

laser pyrography; furniture surfaces; color design

Volume 74 (2023), Issue 4

Timber Strength Grading as Necessary Basis for Structural Design in Ex-YU Region: Part 1

Authors:

Tatjana Kočetov Mišulić, Aleksandra Radujković, Zdravko Popović, Ksenija Hiel

Keywords:

structural coniferous timber; visual grading; strength classes; safety factors; European standards

Volume 74 (2023), Issue 1

Bending Moment of Mortise-and-Tenon Joints in a Crossed Chair Base

Authors:

Seid Hajdarević, Murčo Obućina, Manja Kitek Kuzman, Dick Sandberg

Keywords:

chair; mortise-and-tenon joint; bending moment; joint angle; tenon length

Volume 74 (2023), Issue 1

Structural and Design Values of Solid Timber Beams and Glued Laminated Timber Beams of Dipteryx panamensis and Hieronyma alchorneoides Wood from Fast-Growth Plantation

Authors:

Róger Moya, Carolina Tenorio, Angel Navarro-Mora, Freddy Munoz

Keywords:

tropical species; bending; shear; mezzanine; glulam; mass timber

Volume 74 (2023), Issue 2

Prediction of Adhesion Strength of Some Varnishes Using Soft Computing Models

Authors:

Ibrahim Karaman, Kenan Kiliç, Cevdet Sögütlü

Keywords:

artificial neural network; fuzzy logic; adhesion strength; wood; varnish

Volume 74 (2023), Issue 2

Analysis of Key Attributes of Wooden Toys via an Interval-Valued Spherical Fuzzy Analytic Hierarchy Process

Authors:

Hilal Singer, Şükrü Özşahin

Keywords:

hierarchy process; expert perspective; fuzzy logic; multicriteria decision-making; wooden toy

Volume 74 (2023), Issue 2

Coloration of Lacquered Coatings for Furniture Production with Herbal Dyes and Determining Weathering Resistance

Authors:

Osman Goktas, Yasar Tahsin Bozkaya, Mehmet Yeniocak

Keywords:

furniture industry; lacquer coating; natural dyes; weathering; color changes

Volume 74 (2023), Issue 3

Optimization of Production Parameters of Densified Laminated Veneer Lumber Produced by Using Urea-Formaldehyde Resin

Authors:

Saadettin Murat Onat, Serkan Özdemir

Keywords:

densification; laminated veneer lumber; urea formaldehyde; processing parameters; Taguchi method based grey relational analysis

Volume 74 (2023), Issue 3

Analysis of the Effect of Gypsum-Based Fire Protection Cover on Charring of Wooden Bearing Elements

Authors:

Marie Rusinová, Miloš Lavický, Miloš Kalousek, Martin Sedlmajer

Keywords:

fire resistance; ignition temperature; gypsum plasterboard; gypsum fibreboard; fire test

Volume 74 (2023), Issue 4

The Effect of Hot and Cold Check Tests on Surface Roughness and Glossiness in Varnished Wood Material

Authors:

Abdi Atilgan, Sait Dündar Sofuoğlu

Keywords:

wood material; varnish; surface roughness; glossiness; hot and cold-check test

Volume 73 (2022), Issue 4

Prediction of Optimum Expanded Polystyrene Densities for Best Thermal Insulation Performances of Polystyrene Composite Particleboards by Using Artificial Neural Network

Authors:

Hasan Ozturk, Aydin Demir, Cenk Demirkir

Keywords:

polystyrene composite particleboard; thermal insulation; thermal conductivity; EPS; ANN

Volume 73 (2022), Issue 4

Identification of Defective Joints in Beams via Torsional Vibration

Authors:

Mostafa Kohantorabi, Alireza Asgari, Mona Shayestehkia, Mobina Kohantorabi

Keywords:

joint; prediction; defect; torsional vibration; beech; adhesive

Volume 73 (2022), Issue 1

Diagonal Tension Performance of Impregnated Woodworking Corner Joints

Authors:

Şemsettin Doruk

Keywords:

paraffin; linseed oil; Imersol-Aqua; diagonal tension; woodworking corner joints

Volume 73 (2022), Issue 1

The Effect of Sheathing Material on Racking Performance of Plywood Shear Wall

Authors:

Cenk Demirkir, Aydin Demir, Hasan Ozturk, Ismail Aydin

Keywords:

shear wall; structural plywood; racking performance; fibre direction

Volume 73 (2022), Issue 1

Tensile Performance of Traditional and Modern Corner Joints in Wooden Structures

Authors:

Musa Atar, Fazli Gode, Mustafa Kucuktuvek, Asli Er Akan, Hilal Tugba Ormecioglu, Hakan Keskin

Keywords:

tensile performance; construction materials; corner joints; wooden joints

Volume 73 (2022), Issue 1

Effect of Acetylation and Accelerated Weathering of Nigerian Grown Rubberwood (Hevea brasiliensis, Müll. Arg.) on Equilibrium Moisture Content and Colour Change

Authors:

Samuel Oluyinka Olaniran

Keywords:

rubberwood; equilibrium moisture content; moisture ratio; acetylation; accelerated weathering

Volume 73 (2022), Issue 2

Automatic Damage Detection on Traditional Wooden Structures with Deep Learning-Based Image Classification Method

Authors:

Kemal Haciefendioglu, Hasan Basri Başaga, Murat Emre Kartal, Mehmet Ceyhun Bulut

Keywords:

deep learning method, convolutional neural networks, MobileNet_V2, Inception_V3, ResNet_ V2_50, wooden structures

Volume 73 (2022), Issue 2

Effects of Wooden Dowel Species, Edge Banding Thickness, and Adhesive Types on Embedded Strength in Particleboard

Authors:

Abdurrahman Karaman

Keywords:

PUR-D4, PVC edge banding, embedded strength of dowel, particleboard, dowel

Volume 73 (2022), Issue 3

Influence of Wood Surface Preparation on Roughness, Wettability and Coating Adhesion of Unmodified and Thermally Modified Wood

Authors:

Josip Miklečić, Andrea Lončarić, Nikolina Veseličić, Vlatka Jirouš-Rajković

Keywords:

face milling; sanding; UV irradiation; wetting; adhesion

Volume 73 (2022), Issue 4

Effects of CNC Processing Parameters on Surface Quality of Wood-Based Panels Used in Furniture Industry

Authors:

Aydin Demir, Evren Osman Cakiroglu, Ismail Aydin

Keywords:

wood-based panel; CNC milling machine; surface roughness; processing parameters

Volume 72 (2021), Issue 3

The Effect of Artificial Weathering on Surface Properties of Thermally Modified Oriental Beech Wood

Authors:

Turkay Turkoglu, Hilmi Toker, Ergun Baysal, Ahmet Gunduz, Caglar Altay, Mustafa Kucuktuvek, Huseyin Peker

Keywords:

thermal modification; Oriental beech wood; color; surface roughness; artificial weathering; construction materials

Volume 72 (2021), Issue 3

Possibility of Use of NCC Reinforced Melamine-Urea-Formaldehyde Adhesive in Plywood Manufacturing

Authors:

Jakub Kawalerczyk, Dorota Dziurka, Radosław Mirski, Joanna Siuda, Marta Babicka

Keywords:

plywood; melamine-urea-formaldehyde adhesive; nanocellulose; filler

Volume 72 (2021), Issue 4

Effect of Artificial Ageing on Adhesive Bonds from Heat Treated Spruce

Authors:

Mirko Kariz, Manja Kitek Kuzman, Milan Šernek

Keywords:

heat treated spruce; adhesive bond; artificial ageing; shear strength; delamination; colour change

Volume 72 (2021), Issue 1

An Assessment of Environmental Impact on Glued Wood Building Elements

Authors:

Darius Albrektas, Ernestas Ivanauskas

Keywords:

glued wood (glulam); laminated veneer lumber; modulus of elasticity; coeffi cient of damping; wood defects

Volume 72 (2021), Issue 1

The Relationship between Roughness of Finished Wood Floors and Slip Resistance

Authors:

Josip Miklečić, Vlatka Jirouš-Rajković

Keywords:

slip resistance; surface roughness; finished wood floors; surface roughness parameters

Volume 72 (2021), Issue 3

Examining Parameters of Surface Quality Performance of Paulownia Wood Materials Modified by Thermal Compression Technique

Authors:

Zeki Candan, Oktay Gonultas, Hizir Volkan Gorgun, Öner Ünsal

Keywords:

thermal compression; paulownia; wettability; contact angle; surface roughness

Volume 72 (2021), Issue 1

The Effects of Slicing Parameters on Surface Quality of European Beech Wood

Authors:

Agnieszka Jankowska, Paweł Kozakiewicz, Marcin Zbieć

Keywords:

contact angles; wood wettability; European beech; slicing; pressure bar set

Volume 71 (2020), Issue 3

Durability and Mechanical Performance of Differently Treated Glulam Beams during Two Years of Outdoor Exposure

Authors:

Davor Kržišnik, Samo Grbec, Boštjan Lesar, Denis Plavčak, Aleš Straže, Milan Šernek, Bogdan Šega, Miha Humar

Keywords:

degradation; glulam; mechanical testing; performance; service life; wood

Volume 71 (2020), Issue 3

Wood Surface Finishing of Selected Invasive Tree Species

Authors:

Matjaž Pavlič, Jure Žigon, Marko Petrič

Keywords:

coating; finishing; invasive tree species; oil; wood

Volume 71 (2020), Issue 3

Contribution to the Evaluation of Thermal Insulation Properties of a Simple and a Double Window in a Log building

Authors:

Petr Fait, Pavel Král, Josef Čech, Vladimir Linhart

Keywords:

simple window; double window; thermal insulation properties; heat transfer

Volume 71 (2020), Issue 2

Enhanced Abrasion Resistance of Coated Particleboard Pre-Treated with Atmospheric Plasma

Authors:

Jure Žigon, Sebastian Dahle, Marko Petrič, Matjaž Pavlič

Keywords:

particleboard; plasma; coating; abrasion

Volume 71 (2020), Issue 2

Thermal Degradation of Bonding Strength of Aspen Plywood

Authors:

Pavlo Bekhta, Nataliya Bekhta

Keywords:

plywood; heat treatment; bonding strength; mass loss; density loss; colour change

Volume 71 (2020), Issue 2

On-Line Measurement of Wood Surface Smoothness

Authors:

Jakub Sandak, Daniel Chuchala, Kazimierz A. Orlowski, Anna Sandak, Piotr Taube

Keywords:

wood surface smoothness; triangulation scanner; surface defects; in-line

Volume 71 (2020), Issue 2

Comparison of Visual and Instrumental Assessment of Colour Differences on Finished Wooden Surfaces

Authors:

Matjaž Pavlič, Marko Petrič

Keywords:

coating; colour; gloss; instrumental measurement; visual perception

Volume 71 (2020), Issue 1

Synthesis of Bio-Oilphenol-Formaldehyde Resins under Alkali Conditions: Physical, Chemical and Thermal Properties of Resins and Bonding Performance

Authors:

Günay Özbay, Caglar Cekic, Muhammad Syarhabil Ahmad, Erkan Sami Kokten

Keywords:

bio-phenol; bonding performance; phenol formaldehyde resin; shear strength

Volume 70 (2019), Issue 3

Physico-Mechanical Properties of Thermally Modified Eucalyptus Nitens Wood for Decking Applications

Authors:

Maximilian Wentzel, Óscar González-Prieto, Christian Brischke, Holger Militz

Keywords:

Eucalypt; anti-swelling effi ciency (ASE); hardness; abrasion resistance; timber

Volume 70 (2019), Issue 3

Influence of Natural Surface Ageing on Bonding Quality of Thermally Modified Oak and Beech Wood

Authors:

Vjekoslav Živković, Gustav Gabrek, Goran Mihulja

Keywords:

bonding; delamination; modified wood; shear strength; surface ageing

Volume 70 (2019), Issue 3

Vibrations of Cross-Laminated Timber Floors

Authors:

Ljiljana Kozarić, Martina Vojnić Purčar, Smilja Živković

Keywords:

cross-laminated timber; floor construction; vibrations

Volume 70 (2019), Issue 2

Chemical and Application Properties of Some Solvent and Water Based Coatings on Wooden Substrate

Authors:

Shikhar Shukla, Krishna K. Pandey, Kishan Kumar

Keywords:

organic coatings; water borne coatings; NC lacquer; polyurethane; Melia dubia; film thickness; FTIR; gloss

Volume 70 (2019), Issue 1

Influence of Finishing Materials on Viscous Elastic Properties of Wooden Structures

Authors:

Darius Albrektas, Elvyra Revuckaitė, Vaida Dobilaitė, Milda Jucienė

Keywords:

oak wood; pine wood; modulus of elasticity; damping coefficient; finishing materials; pentaftal varnish; wood oil

Volume 70 (2019), Issue 4

Eco-Friendly Laminated Strand Lumber from Date Palm Rachis: Analysis of Mechanical Properties by Taguchi Design of Experiment

Authors:

Masoud Shafie, Hamid Zarea-Hosseinabadi

Keywords:

date palm rachis; structural composite lumber; laminated strand lumber; Taguchi design of experiments; mechanical properties

Volume 70 (2019), Issue 4

Influence of Layered Structure of Composite Timber Floor Boards on Their Hardness

Authors:

Piotr Borysiuk, Izabela Burawska-Kupniewska, Radosław Auriga, Grzegorz Kowaluk, Paweł Kozakiewicz, Marcin Zbieć

Keywords:

veneer; composite; flooring material; knotholes; hardness

Volume 69 (2018), Issue 4

Weathering Resistance of Poplar Wood Coated by Organosilane Water Soluble Nanomaterials

Authors:

Hadi Gholamiyan, Asghar Tarmian

Keywords:

clear coatings; organosilane nanomaterials; weathering; wood

Volume 69 (2018), Issue 3

The Impact of Nanoparticles and Moisture Content on Bonding Strength of Urea Formaldehyde Resin Adhesive

Authors:

Timuçin Bardak, Eser Sozen, Kadir Kayahan, Selahattin Bardak

Keywords:

nanoparticles; urea formaldehyde; moisture content; lap joint shear strength; bonding strength

Volume 69 (2018), Issue 1

Model Calibration of Prefabricated Timber Wall Frames Made of Hieronyma Alchorneoides and Gmelina Arborea Timber Using Nail and Screw Fasteners

Authors:

Tony Leiva-Leiva, Róger Moya, Angel Navarro-Mora

Keywords:

structural timber; vertical diaphragms; lateral loads; light frame; fastener; calibration model

Volume 65 (2014), Issue 3

The Influence of Cyclic Loading on Ultimate Bending Strength of Beech Solid and Laminated Wood

Authors:

Milan Gaff, Miroslav Gašparík, Štefan Barcík

Keywords:

cyclic loading; laminated wood; solid wood; ultimate bending strength; beech wood; PVAC adhesive

Volume 65 (2014), Issue 2

Properties of Liquid and Polycondensed UF Resin Modified with pMDI

Authors:

Dorota Dziurka, Radosław Mirski

Keywords:

UF; pMDI; hybrid resin; FTIR; hydrophobicity

Volume 64 (2013), Issue 4

The fracture moment of corner joints bonded by different glues

Authors:

Jasna Hrovatin, Anton Zupančič, Milan Šernek, Leon Oblak

Keywords:

window; construction; joint; wood; glue

Volume 64 (2013), Issue 3

Influence of the Addition of Urea-Formaldehyde Adhesive to Liquefied Wood on Curing

Authors:

Aleš Ugovšek, Milan Šernek

Keywords:

liquefied wood; urea-formaldehyde adhesive; differential scanning calorimetry; rheometry; shear strength

Volume 64 (2013), Issue 2

The Dilemma Whether to Produce Glued or Sawn Wooden Beams?

Authors:

Michal Zeman

Keywords:

production of static structural members; trends; production of BSH and KVH; sawn wooden beams; timber costs; wooden structures; cost- effectiveness

Volume 64 (2013), Issue 1

Influence of Gluing Technology on Physical and Mechanical Properties of Laminated Veneer Lumber

Authors:

Murčo Obućina, Goran Turk, Ejub Džaferović, Jože Resnik

Keywords:

laminated veneer lumber; hot gluing; high frequency gluing; physical properties; mechanical properties

Volume 64 (2013), Issue 1

Some of the Physical Properties of UV Jet Printed Furniture Surfaces

Authors:

Suat Altun, Didem Köse

Keywords:

UV jet printing method; UV curable digital printing ink; melamine faced chipboard; printpan; physical properties

Volume 63 (2012), Issue 3

Energy-Efficient Renovation Principles for Prefabricated Timber-Frame Residential Buildings

Authors:

Vesna Žegarac, Miroslav Premrov, Manja Kitek Kuzman

Keywords:

timber building; glazing; energy efficiency; renovation

Volume 63 (2012), Issue 1

Optimization of Double Thread Nuts Screwing Process

Authors:

Goran Mihulja, Dominik Poljak, Tomislav Basar

Keywords:

metal angles; double thread nuts; screwing moment; time saving; extraction strength

Volume 62 (2011), Issue 1

The Influence of Curing Temperature on Rheological Properties of Epoxy Adhesives

Authors:

Maksimiljan Mravljak, Milan Šernek

Keywords:

epoxy adhesives; gel point; loss modulus; rheology; storage modulus

Volume 62 (2011), Issue 1

Optimization of a Pressing Diagram in OSB Pressing

Authors:

Jaroslav Hrázský, Pavel Král

Keywords:

OSB; pressing; technical properties; isocyanate glue (PMDI); urea-formaldehyd glue (UF)

Volume 62 (2011), Issue 1

Impact of Resin Content on Swelling Pressure of Three Layer Perticleboard Bonded with Urea-Formaldehyde Adhesive

Authors:

Sergej Medved, Alan Antonović, Vladimir Jambreković

Keywords:

particleboards; resin content; swelling; swelling pressure

Volume 62 (2011), Issue 4

Accelerated Weathering of Coated and Uncoated Beech Wood Modified with Citric Acid

Authors:

Josip Miklečić, Vlatka Jirouš-Rajković

Keywords:

chemical modification; citric acid; QUV weathering; wood stain; beech wood

Volume 62 (2011), Issue 2

The Influence of Solvent Content in Liquefied Wood and of the Addition of Condensed Tannin on Bonding Quality

Authors:

Aleš Ugovšek, Franc Budija, Mirko Kariz, Milan Šernek

Keywords:

adhesive; condensed tannin; FT-IR; liquefied wood; shear strength

Volume 62 (2011), Issue 2

Welding Time as an Important Factor of Beech Welding

Authors:

Ivica Župčić, Andrija Bogner, Ivica Grbac

Keywords:

welding of beech; welding time; strength of the welded joint; dowels; embedded force

Volume 62 (2011), Issue 2

Impact of MDF Board Side Plane Instability on Lacquer Film Crack Appearance

Authors:

Vladimir Jambreković, Nikola Španić, Tajana Jambreković, Borche Iliev

Keywords:

MDF board; polyurethane film; technical properties; lacquer film cracks; MDF board cracks

Volume 61 (2010), Issue 3

Effect of Sanding on Surface Properties of Medium Density Fiberboard

Authors:

Nadir Ayrilmis, Zeki Candan, Turgay Akbulut, Ozgur Balkiz

Keywords:

contact angle; medium density fiberboard (MDF); rhododendron (R.)ponticum L.; sanding; surface absorption; surface roughness; wettability

Volume 61 (2010), Issue 3

Glued Laminated Timber in Architecture

Authors:

Manja Kitek Kuzman, Leon Oblak, Srečko Vratuša

Keywords:

wood structure; glued laminated timber (glulam); structural elements; composite

Volume 61 (2010), Issue 1

Analysis of Selected Mechanical Properties of Construction Wood KVH and Parallam 2.0 E

Authors:

Jaroslav Hrázský, Pavel Král

Keywords:

construction materials; construction wood KVH; Parallam; bending strength; modulus of elasticity in bending; tensile strength; compression strength; density; moisture content

Volume 61 (2010), Issue 4

Effect of Glueline Shape on Strength of Mortise and Tenon Joint

Authors:

Silvana Prekrat, Jerzy Smardzewski

Keywords:

gluelin; mortise and tenon joint; numerical analysis; wood

Volume 60 (2009), Issue 1

Determination of relationships between density, amount of glue and mechanical properties of OSB

Authors:

Jaroslav Hrázský, Pavel Král

Keywords:

oriented strand board (OSB); density; bending strength; modulus of elasticity; tensile strength perpendicular to the board surface; amount of glue; PMDI glues

Volume 60 (2009), Issue 4

Perceptions & Use of Termite Resistant Treated Wood Products in the United States. Part II: The Perspective of Home Builders and Architects in Formosan Subterranean Termite Infected States

Authors:

Richard Vlosky, Todd Shupe, Qinglin Wu

Keywords:

termites; United States; treated wood; home builders; architects

Volume 60 (2009), Issue 3

Perceptions & use of termite resistant treated wood products. Part I: The perspective of homeowners in Formosan subterranean termite infected States

Authors:

Richard Vlosky, Todd Shupe, Qinglin Wu

Keywords:

termites; United States; wood products; home owners; loss

Volume 60 (2009), Issue 2

Comparison of percentage of wood fracture surface analyzed by computer and by ISO 6238 in determining the quality of adhesive bonds

Authors:

Alica Lojen, Goran Mihulja, Ivica Župčić, Andrija Bogner

Keywords:

gluing quality; portion of wood failure; subjective and objective methods

Volume 60 (2009), Issue 2

Fire retardants for wood

Authors:

Vlatka Jirouš-Rajković, Josip Miklečić

Keywords:

wood; combustion of wood; fire retardants; fire retardant coatings; chemical impregnation by pressure-treating

Volume 59 (2008), Issue 4

Hollow wooden post and its interaction with metal structural members

Authors:

Juraj Detvaj, Filip Argay, Daniel Ruman

Keywords:

wooden post; bearing members; structural members; spruce timber

Volume 59 (2008), Issue 2

Dimensional stability of heat treated wood floorings

Authors:

Vjekoslav Živković, Ivan Prša, Hrvoje Turkulin, Tomislav Sinković, Vlatka Jirouš-Rajković

Keywords:

heat treated wood; parquet elements; dimensional stability; beech; ash

Volume 58 (2007), Issue 4

A new method for the determination of the proportion of wood failure area on the glue bond

Authors:

Goran Mihulja, Andrija Bogner, Davor Banči

Keywords:

wood gluing; wood failure area; digital imaging; computer image analysis

Volume 58 (2007), Issue 2

Strength and durability of glued wood Part two: Glue joint strength testing methods

Authors:

Goran Mihulja, Andrija Bogner

Keywords:

glued joint; type and shape of specimen; gluing strength; surface failure area; specimen deformation

Volume 58 (2007), Issue 1

Glued laminated panels as kitchen countertops

Authors:

Kambiz Pourtahmasi, Asghar Tarmian, Mazdak Mojarradi

Keywords:

32 mm thick MDF; 38 mm thick particleboard; glued laminated panel; kitchen countertop

Volume 58 (2007), Issue 1

Methods for improving building wood properties

Authors:

Vlatka Jirouš-Rajković, Hrvoje Turkulin, Vjekoslav Živković

Keywords:

wood modification; heat-treated wood; acetylation; nano-coatings; wood-plastic composites; WPC

Volume 46 (1995), Issue 1

Accelerated weathering of wood surfaces - The QUV accelerated weathering tester

Authors:

Vlatka Jirouš-Rajković, Hrvoje Turkulin

Keywords:

weathering; accelerated weathering tester; wood durability

Volume 46 (1995), Issue 4

Work of adhesion as criterion for determination of optimum surface tension in adhesives

Authors:

Andrija Bogner

Keywords:

wetting angle; work of adhesion; critical surface energy; roughness; optimum surface tension of adhesives

Volume 46 (1995), Issue 4

Primjena karbamid-formaldehidnih ljepila za površinsko lijepljenje u proizvodnji namještaja i uslojenih pločastih materijala

Authors:

Manfred Dunky, Stjepan Petrović

Keywords:

Colour Changes of Weathered Wood Surfaces Before and After Treatment with Iron (II) Sulphate

Water Permeability and Adhesion Strength of Bio-based Coating Applied on Wood

Modeling of Color Design on Furniture Surfaces with CNC Laser Modification

Timber Strength Grading as Necessary Basis for Structural Design in Ex-YU Region: Part 1

Bending Moment of Mortise-and-Tenon Joints in a Crossed Chair Base

Structural and Design Values of Solid Timber Beams and Glued Laminated Timber Beams of Dipteryx panamensis and Hieronyma alchorneoides Wood from Fast-Growth Plantation

Prediction of Adhesion Strength of Some Varnishes Using Soft Computing Models

Analysis of Key Attributes of Wooden Toys via an Interval-Valued Spherical Fuzzy Analytic Hierarchy Process

Coloration of Lacquered Coatings for Furniture Production with Herbal Dyes and Determining Weathering Resistance

Optimization of Production Parameters of Densified Laminated Veneer Lumber Produced by Using Urea-Formaldehyde Resin

Analysis of the Effect of Gypsum-Based Fire Protection Cover on Charring of Wooden Bearing Elements

The Effect of Hot and Cold Check Tests on Surface Roughness and Glossiness in Varnished Wood Material

Prediction of Optimum Expanded Polystyrene Densities for Best Thermal Insulation Performances of Polystyrene Composite Particleboards by Using Artificial Neural Network

Identification of Defective Joints in Beams via Torsional Vibration

Diagonal Tension Performance of Impregnated Woodworking Corner Joints

The Effect of Sheathing Material on Racking Performance of Plywood Shear Wall

Tensile Performance of Traditional and Modern Corner Joints in Wooden Structures

Effect of Acetylation and Accelerated Weathering of Nigerian Grown Rubberwood (Hevea brasiliensis, Müll. Arg.) on Equilibrium Moisture Content and Colour Change

Automatic Damage Detection on Traditional Wooden Structures with Deep Learning-Based Image Classification Method

Effects of Wooden Dowel Species, Edge Banding Thickness, and Adhesive Types on Embedded Strength in Particleboard

Influence of Wood Surface Preparation on Roughness, Wettability and Coating Adhesion of Unmodified and Thermally Modified Wood

Effects of CNC Processing Parameters on Surface Quality of Wood-Based Panels Used in Furniture Industry

The Effect of Artificial Weathering on Surface Properties of Thermally Modified Oriental Beech Wood

Possibility of Use of NCC Reinforced Melamine-Urea-Formaldehyde Adhesive in Plywood Manufacturing

Effect of Artificial Ageing on Adhesive Bonds from Heat Treated Spruce

An Assessment of Environmental Impact on Glued Wood Building Elements

The Relationship between Roughness of Finished Wood Floors and Slip Resistance

Examining Parameters of Surface Quality Performance of Paulownia Wood Materials Modified by Thermal Compression Technique

The Effects of Slicing Parameters on Surface Quality of European Beech Wood

Durability and Mechanical Performance of Differently Treated Glulam Beams during Two Years of Outdoor Exposure

Wood Surface Finishing of Selected Invasive Tree Species

Contribution to the Evaluation of Thermal Insulation Properties of a Simple and a Double Window in a Log building

Enhanced Abrasion Resistance of Coated Particleboard Pre-Treated with Atmospheric Plasma

Thermal Degradation of Bonding Strength of Aspen Plywood

On-Line Measurement of Wood Surface Smoothness

Comparison of Visual and Instrumental Assessment of Colour Differences on Finished Wooden Surfaces

Synthesis of Bio-Oilphenol-Formaldehyde Resins under Alkali Conditions: Physical, Chemical and Thermal Properties of Resins and Bonding Performance

Physico-Mechanical Properties of Thermally Modified Eucalyptus Nitens Wood for Decking Applications

Influence of Natural Surface Ageing on Bonding Quality of Thermally Modified Oak and Beech Wood

Vibrations of Cross-Laminated Timber Floors

Chemical and Application Properties of Some Solvent and Water Based Coatings on Wooden Substrate

Influence of Finishing Materials on Viscous Elastic Properties of Wooden Structures

Eco-Friendly Laminated Strand Lumber from Date Palm Rachis: Analysis of Mechanical Properties by Taguchi Design of Experiment

Influence of Layered Structure of Composite Timber Floor Boards on Their Hardness

Weathering Resistance of Poplar Wood Coated by Organosilane Water Soluble Nanomaterials

The Impact of Nanoparticles and Moisture Content on Bonding Strength of Urea Formaldehyde Resin Adhesive

Model Calibration of Prefabricated Timber Wall Frames Made of Hieronyma Alchorneoides and Gmelina Arborea Timber Using Nail and Screw Fasteners

The Influence of Cyclic Loading on Ultimate Bending Strength of Beech Solid and Laminated Wood

Properties of Liquid and Polycondensed UF Resin Modified with pMDI

The fracture moment of corner joints bonded by different glues

Influence of the Addition of Urea-Formaldehyde Adhesive to Liquefied Wood on Curing

The Dilemma Whether to Produce Glued or Sawn Wooden Beams?

Influence of Gluing Technology on Physical and Mechanical Properties of Laminated Veneer Lumber

Some of the Physical Properties of UV Jet Printed Furniture Surfaces

Energy-Efficient Renovation Principles for Prefabricated Timber-Frame Residential Buildings

Optimization of Double Thread Nuts Screwing Process

The Influence of Curing Temperature on Rheological Properties of Epoxy Adhesives

Optimization of a Pressing Diagram in OSB Pressing

Impact of Resin Content on Swelling Pressure of Three Layer Perticleboard Bonded with Urea-Formaldehyde Adhesive

Accelerated Weathering of Coated and Uncoated Beech Wood Modified with Citric Acid

The Influence of Solvent Content in Liquefied Wood and of the Addition of Condensed Tannin on Bonding Quality

Welding Time as an Important Factor of Beech Welding

Impact of MDF Board Side Plane Instability on Lacquer Film Crack Appearance

Effect of Sanding on Surface Properties of Medium Density Fiberboard

Glued Laminated Timber in Architecture

Analysis of Selected Mechanical Properties of Construction Wood KVH and Parallam 2.0 E

Effect of Glueline Shape on Strength of Mortise and Tenon Joint

Determination of relationships between density, amount of glue and mechanical properties of OSB

Perceptions & Use of Termite Resistant Treated Wood Products in the United States. Part II: The Perspective of Home Builders and Architects in Formosan Subterranean Termite Infected States

Perceptions & use of termite resistant treated wood products. Part I: The perspective of homeowners in Formosan subterranean termite infected States

Comparison of percentage of wood fracture surface analyzed by computer and by ISO 6238 in determining the quality of adhesive bonds

Fire retardants for wood

Hollow wooden post and its interaction with metal structural members

Dimensional stability of heat treated wood floorings

A new method for the determination of the proportion of wood failure area on the glue bond

Strength and durability of glued wood Part two: Glue joint strength testing methods

Glued laminated panels as kitchen countertops

Methods for improving building wood properties

Accelerated weathering of wood surfaces - The QUV accelerated weathering tester