Archive | Drvna Industrija Journal

Volume 74 (2023), Issue 1

Synthesis of Phenolic Resin Reinforced with TiO2 Nanoparticles and its Effect on Combustion Performance of Laminated Veneer Lumber (LVL)

Authors:

Günay Özbay, Musa Atar, Ayhan Ozcifci

Keywords:

adhesive; combustion; FT-IR; nano-chemicals; TiO2 nanoparticles

Volume 74 (2023), Issue 1

Utilization of Scots Pine (Pinus sylvestris L.) Timber with Defects in Production of Engineered Wood Products

Authors:

Daniel Koynov, Miglena Valyova, Emiliyan Parzhov, Lee Seng Hua

Keywords:

Pinus sylvestris L.; engineered wood; knots; cross-laminated timber (CLT); solid wood panels

Volume 74 (2023), Issue 1

The Influence of Different Wood Modifications on Pull-out Force of Rotary Welded Dowels

Authors:

Ivica Župčić, Igor Đukić, Matija Jug, Mario Jurišić, Marin Hasan

Keywords:

rotary welding; thermal modification; modification with citric acid; pull-out force; wooden dowels

Volume 73 (2022), Issue 1

Reinforcement of Joints Between LVL Members with GFRP and Finite Element Analysis

Authors:

Mosayeb Dalvand, Ghanbar Ebrahimi, Kambiz Pourtahmasi

Keywords:

veneer lumber; glass fiber reinforced polymer; finite element method; failure modes

Volume 73 (2022), Issue 2

Characterization of Formaldehyde Emission and Combustion Properties of Peanut (Arachis Hypogaea) Husk-Based Green Composite Panels for Building Applications

Authors:

Ersin Ercan, Musa Atar, Mustafa Kucuktuvek, Hakan Keskin

Keywords:

particleboard, peanut husk, combustion properties, formaldehyde emission, green building materials

Volume 73 (2022), Issue 2

Analysis of Circular Saw Tooth Marks Profile on Material Machined Surface After Filtering with Fast Fourier Transform (FFT)

Authors:

Igor Đukić, Miran Merhar, Juraj Jovanović, Darko Herceg

Keywords:

machined surface roughness, circular saw, solid wood, signal analysis, FFT

Volume 73 (2022), Issue 2

Automatic Damage Detection on Traditional Wooden Structures with Deep Learning-Based Image Classification Method

Authors:

Kemal Haciefendioglu, Hasan Basri Başaga, Murat Emre Kartal, Mehmet Ceyhun Bulut

Keywords:

deep learning method, convolutional neural networks, MobileNet_V2, Inception_V3, ResNet_ V2_50, wooden structures

Volume 73 (2022), Issue 3

Withdrawal Resistance of T-Nuts in Various Furniture Materials

Authors:

Ewa Skorupińska, Krzysztof Wiaderek, Maciej Sydor

Keywords:

T-nut; pinewood; oriented strand board; plywood; particleboard; furniture materials

Volume 73 (2022), Issue 2

Physical and Mechanical Properties and Decay Resistance of Poplar Modified with mDMDHEU

Authors:

Huseyin Sivrikaya, Ahmet Can

Keywords:

wood modification, mDMDHEU, dimensional stability, MOR, FTIR, TGA, decay resistance

Volume 73 (2022), Issue 3

Starch Impregnation Effect of Testliner Paper on Stiffness of Honeycomb Panels with Slender Cells

Authors:

Jerzy Smardzewski, Michał Słonina

Keywords:

honeycomb; hexagonal cell; orthotropy; impregnation; elastic properties; strength

Volume 73 (2022), Issue 2

Smart Office Chairs with Sensors for Detecting Sitting Positions and Sitting Habits: A Review

Authors:

Zoran Vlaović, Marko Jaković, Danijela Domljan

Keywords:

office chair, smart chair, sensors, smart seating, internet of things, health

Volume 73 (2022), Issue 4

Combustion and Decay Resistance Performance of Scots Pine Treated with Boron and Copper Based Wood Preservatives

Authors:

Sedat Sürdem, Cihan Eseroglu, Serhat Yildiz, Cevdet Sögütlü, Abdulkerim Yörükoglu

Keywords:

wood preservatives; decay resistance; boron compounds; combustion resistance filler

Volume 73 (2022), Issue 4

Characterization and Separation of Lignin from Kraft Black Liquor with Different Alcohols

Authors:

Ayhan Gençer, Mehmet Akyüz, Fadime Yurdakurban, Deniz Aydemir

Keywords:

kraft pulping; black liquor; lignin, recycling; lignin characterization

Volume 73 (2022), Issue 4

Effects of Silane Treatment on Physical and Mechanical Properties of Particleboards Prepared with Urea Formaldehyde

Authors:

Saadettin Murat Onat, Orhan Kelleci

Keywords:

silane; particleboard; physical and mechanical properties

Volume 73 (2022), Issue 4

Physical and Mechanical Properties of Thermoplastic Composites Filled with Wood Flour of Underutilized Chaste Tree

Authors:

Nadir Ayrilmis, Esra Yildiz

Keywords:

Vitex agnus-castus; polypropylene; thermoplastic; composite; lignocellulosic filler

Volume 72 (2021), Issue 4

Finite Element Analysis of Dynamic Characteristics and Bending Stiffness for Cross Laminated Timber Floor Panels with and without Openings

Authors:

Ljiljana Kozarić, Smilja Bursać, Martina Vojnić Purčar, Miroslav Bešević, Žikica Tekić

Keywords:

cross laminated timber floors; bending stiffness; floors with openings; finite element analysis

Volume 72 (2021), Issue 3

Effect of Using Urea Formaldehyde Modified with Extracts in Plywood on Formaldehyde Emission

Authors:

Ugur Bilgin, Gursel Colakoglu

Keywords:

formaldehyde emission; plywood; elm bark; hazelnut husk; tannin; urea formaldehyde

Volume 72 (2021), Issue 1

Determining the Competencies Necessary for Exporting in Furniture Industry with Decision Tree Models

Authors:

Alper Aytekin, Mehmet Pekkaya

Keywords:

export determinants; furniture industry; data mining; decision trees

Volume 72 (2021), Issue 3

Investigation of the Effect of Using Activated Sludge Treated with Acetic Acid on Physical and Strength Properties of Recycled Pulp

Authors:

Naghmeh Amani, Ramin Vaysi, Abdollah Najafi, Seyed Eshagh Ebadi

Keywords:

activated sludge; acetic acid; newsprint paper; eco-friendly bio composite; resistance features

Volume 72 (2021), Issue 4

Decay Resistance and Color Change of Pine and Beech Wood Impregnated with R. Luteum and R. Ponticum Plant Extracts

Authors:

Huseyin Pelit, Ali Alkan, Mesut Yalçın

Keywords:

color change; decay resistance; impregnation; natural extract; wood material

Volume 71 (2020), Issue 4

Mechanical Properties and Free Formaldehyde Content of Particleboards Produced using Ammonium Sulphate-Based Hardener Partially Replaced with Tartaric Acid

Authors:

Nikola Španić, Vladimir Jambreković, Goran Mihulja, Željko Milanović

Keywords:

particleboards; hardener; tartaric acid; mechanical properties; free formaldehyde content

Volume 71 (2020), Issue 4

Weath ering Performance of Beech Wood Coated with Acrylic Paint Containing UV Stabilizers of Dihydroxy Benzophenone and Nano Zinc Oxide

Authors:

Mehrnaz Akbarnezhad, Davood Rasouli, Hossein Yousefi, Mahdi Mashkour

Keywords:

acrylic coating; weathering; beech wood; dihydroxy benzophenone and nano zinc oxide

Volume 71 (2020), Issue 3

Strength Investigation of an Upholstered Furniture Frame with Side Plates of PB, OSB and PLY by Finite Element Method

Authors:

Nelly Staneva, Yancho Genchev, Desislava Hristodorova

Keywords:

strength; upholstered furniture frame; particleboard; oriented strand board; plywood; CAE/FEM

Volume 71 (2020), Issue 3

Bio-based Methods with Potentials for Application in Wooden Furniture Industry

Authors:

Karin Hrovatin, Jasna Hrovatin

Keywords:

biotechnology; natural products; wood; furniture; wood protection; wood colouring; natural adhesives; wood functionalisation; biomimicry

Volume 71 (2020), Issue 2

Enhanced Abrasion Resistance of Coated Particleboard Pre-Treated with Atmospheric Plasma

Authors:

Jure Žigon, Sebastian Dahle, Marko Petrič, Matjaž Pavlič

Keywords:

particleboard; plasma; coating; abrasion

Volume 71 (2020), Issue 2

Engineering the Properties of Eco-Friendly Medium Density Fibreboards Bonded with Lignosulfonate Adhesive

Authors:

Viktor Savov, Petar Antov

Keywords:

eco-friendly MDF; lignosulfonate; physical and mechanical properties; bio-based adhesives; woodbased panels

Volume 71 (2020), Issue 2

Characterisation and Modelling of Drying Kinetics of Thin Ash and Oak Wood Lamellas Dried with Infrared Radiation and Hot Air

Authors:

Aleš Straže, Miljenko Klarić, Zlatko Budrović, Stjepan Pervan

Keywords:

wood drying kinetics; hot air drying; infrared drying; moisture diffusion

Volume 71 (2020), Issue 2

Numerical Modelling of Stiffness of RTA Furniture with New Externally Invisible and Dismountable Joints

Authors:

Łukasz Krzyżaniak, Jerzy Smardzewski, Silvana Prekrat

Keywords:

furniture; FEM; invisible joints; RTA; stiffness

Volume 71 (2020), Issue 1

Properties of Plywood Produced with Urea-Formaldehyde Adhesive Modified with Nanocellulose and Microcellulose

Authors:

Jakub Kawalerczyk, Dorota Dziurka, Radosław Mirski, Kinga Szentner

Keywords:

nanocellulose; microcellulose; urea-formaldehyde resin; plywood; modification

Volume 71 (2020), Issue 4

Effect of Natural Resin from Wild Pistachio Trees on Physical Properties and Durability of Beech Wood: Alone and in Combination with Boric Acid

Authors:

Soheila Izadyar, Yaser Babaei, Davood Efhamisisi

Keywords:

pistachio trees; natural resin; weight gain; durability; physical properties

Volume 70 (2019), Issue 4

Effect of Accelerated Weathering Test on Selected Properties of Bamboo, Scots Pine and Oriental Beech Wood Treated with Waterborne Preservatives

Authors:

Elif Topaloğlu

Keywords:

accelerated weathering; bamboo; mechanical properties; waterborne preservative; wood

Volume 70 (2019), Issue 1

Analytical Analysis of Distribution of Bending Stresses in Layers of Plywood with Numerical Verification

Authors:

Andrzej Makowski

Keywords:

plywood; stress distribution; veneers; layers; FEM; numerical analysis

Volume 69 (2018), Issue 4

Comparison of VOC Emissions from Natural Wood and Heat Treated Wood

Authors:

Petr Čech

Keywords:

VOC emissions; spruce; poplar; heat-treated wood; gas chromatography

Volume 69 (2018), Issue 4

Comparison of Finite Element Models for Particle Boards with Homogenous and Three-Layer Structure

Authors:

Jaroslav Kljak, Nikola Španić, Vladimir Jambreković

Keywords:

particle board; structure; finite element (FE) model; bending properties

Volume 69 (2018), Issue 4

Screw Withdrawal Resistance and Surface Soundness of Three-Layer Fiberboard Having Coarse Fibers in Core Layer

Authors:

Nadir Ayrilmis, Turgay Akbulut

Keywords:

coarse fiber; resin; surface soundness; screw withdrawal resistance; three-layer fibreboard

Volume 69 (2018), Issue 3

Supplementation of Natural Tannins as an Alternative to Formaldehyde in Urea and Melamine Formaldehyde Resins used in MDF Production

Authors:

Sima Sepahvand, Kazem Doosthosseini, Hamidreza Pirayesh, Behrooz Karamdoost Maryan

Keywords:

Tannin; MF; UF; Formaldehyde emission; MDF

Volume 69 (2018), Issue 2

Mechanical Properties and Formaldehyde Release of Boards Manufactured with Hygrothermally Treated Tepa (Laureliopsis Philippiana Looser) Particles

Authors:

Rommel Crespo Gutiérrez, Luis Valenzuela, Hernán Wilson

Keywords:

Particleboard; hygrothermal treatment; Laureliopsis philippiana; urea-formaldehyde; particle geometry; mechanical properties; formaldehyde release Hrčak ID: 202891

Volume 69 (2018), Issue 2

Dimensional Stability and Water Absorption of Spruce Wood (Picea Abies Karst.) Impregnated and Coated with Polyurethane and Acrylic Coatings

Authors:

Konstantin Bahcevandziev, Nikola Mihajlovski

Keywords:

impregnacija; premazi; smrekovina; poboljšanje dimenzijske stabilnosti drva

Volume 69 (2018), Issue 2

Production and Characterization of Bacterial Cellulose with Different Nutrient Source and Surface–Volume Ratios

Authors:

Gokhan Gunduz, Nejla Aşık

Keywords:

bacterial cellulose; crystallinity; morphology; carrot; production

Volume 69 (2018), Issue 2

Formaldehyde Release from Plywood Manufactured with Two Types of Urea Formaldehyde Resins after Fire Retardant Treatment of Veneers

Authors:

Aydin Demir, Ismail Aydin, Hasan Ozturk

Keywords:

formaldehyde release; plywood; veneer; fire retardant; urea formaldehyde

Volume 69 (2018), Issue 1

The Effect of Nanoboron Nitride on Some Properties of Biopolymer Nanocomposites with Cellulose Nanofibrils and Nanoclays

Authors:

Gulyaz Al, Deniz Aydemir, Nadir Ayrilmis, Bulent Kaygin, Gokhan Gunduz

Keywords:

nanoboron nitride; polymer nanocomposites; cellulose nanofibrils; nanoclays; biopolymers

Volume 68 (2017), Issue 2

Wood-Cement Board Reinforced with Steel Nets and Woven Hemp Yarns: Physical and Mechanical Properties

Authors:

Hossein Rangavar

Keywords:

wood-cement board; cement content; steel nets; hemp yarns; physical and mechanical properties

Volume 68 (2017), Issue 2

Micro-Tensile and Compression Strength of Scots Pine Wood and Comparison with Standard-Size Test Results

Authors:

Ümit Büyüksarı, Nusret As, Türker Dündar, Ezel Sayan

Keywords:

micro-sized specimens; standard-sized specimens; tensile strength; compression strength

Volume 68 (2017), Issue 2

Operational vs. Embodied Energy: a Case for Wood Construction

Authors:

Laszlo Bejo

Keywords:

climate change; embodied energy; emissions; carbon-dioxide; carbon sequestration; wood based construction

Volume 68 (2017), Issue 2

Measuring the Formaldehyde Content from Different Types of Oriented Strand Board Manufactured with Different Thicknesses and Glued with Different Resins

Authors:

Mohamed Z. M. Salem, Martin Böhm, Ramadan Nasser

Keywords:

construction panels; formaldehyde content; green products; OSB

Volume 68 (2017), Issue 1

Determination of Screw Withdrawal Resistance of Some Heat-Treated Wood Species

Authors:

Osman Perçin, Şekip Şadiye Yasar, Mustafa Altunok, Oğuzhan Uzun

Keywords:

heat treatment; black pine; hornbeam; Uludağ fir; screw withdrawal resistance

Volume 68 (2017), Issue 3

Impregnability of Paulownia and Populus Wood with Copper Based Preservatives

Authors:

Davood Rasouli, Mohsen Bahmani, Miha Humar

Keywords:

impregnation; dipping; Paulownia; Populus; penetration; uptake of preservative solution

Volume 67 (2016), Issue 3

Physical Properties of Boards Manufactured with Hygrothermally Treated Tepa (Laureliopsis Philippiana Looser) Particles

Authors:

Rommel Crespo Gutiérrez, Luis Valenzuela, Hernán Wilson

Keywords:

Particleboard; hygrothermal treatment; Laureliopsis philippiana; physical properties; dimensional stability

Volume 67 (2016), Issue 2

Contribution to Research on Certain Production Costs by Investing into Computer Aided Technology of Production of Wooden Elements with Pre-Planing of Sawn Wood

Authors:

Josip Faletar, Andreja Čunčić Zorić, Zlatko Budrović, Tomislav Pađen

Keywords:

wood elements; planing; classic secondary sawmill; computer aided secondary sawmill; production costs

Volume 67 (2016), Issue 1

The Effects of Poly(vinyl acetate) Filled with Nanoclay and Cellulose Nanofibrils on Adhesion Strength of Poplar and Scots Pine Wood

Authors:

Deniz Aydemir, Gokhan Gunduz, Nejla Aşık, Alice Wang

Keywords:

Poly(vinyl acetate); cellulose nanofibrils (CNFs); nano clay (NC); nanoparticles filled composites; adhesion

Volume 66 (2015), Issue 2

Analysis of Behaviour of Prefabricated Staircases with One-Sided Suspended Stairs

Authors:

Jan Pěnčík, Miloš Lavický, Pavel Král, Zdeňka Havířová

Keywords:

analysis of behavior; prefabricated staircase; numerical modelling; experimental testing

Volume 66 (2015), Issue 1

Method of Lacquer Products on Emissions of Volatile Organic Compounds

Authors:

Agata Stachowiak-Wencek, Włodzimierz Prądzyński

Keywords:

volatile organic compounds; surface finishing; waterborne products; furniture industry; air analysis; GC/MS/TD

Volume 66 (2015), Issue 1

Tests of Wooden Specimens from Scots Pine (Pinus sylvestris) with the Help of Anisotropic Plasticity Material Model

Authors:

Jan Pěnčík

Keywords:

Scots pine (Pinus sylvestris); FEA; numerical modelling; elastic constants; material constants; anisotropic plasticity

Volume 66 (2015), Issue 1

Mineralized Wood Particle Reinforced Concrete as Stiffening Elements with Reduced Density

Authors:

Fabian Wulf, Karsten Schulz, Lukas Brösel, Alexander Pfriem

Keywords:

wood concrete compound; mineralization; compressive strength

Volume 66 (2015), Issue 4

Effect of Heat Treatment of Wild Cherry Wood on Abrasion Resistance and Withdrawal Capacity of Screws

Authors:

Ayhan Aytin, Süleyman Korkut, Nusret As, Öner Ünsal, Gokhan Gunduz

Keywords:

Heat treatment; ThermoWood; abrasion resistance; withdrawal capacity of screws; Wild Cherry wood

Volume 66 (2015), Issue 4

Application of Reduced Stiffness of Complex Laminate in Finite Elements for Chair Analysis

Authors:

Biserka Nestorović, Ivica Grbac, Predrag Nestorović, Jelena Milošević

Keywords:

reduced stiffness; finite elements; composite; material constants; shell; chair

Volume 66 (2015), Issue 3

Trade Performance and Competitiveness of the Slovak Wood Processing Industry within the Visegrad Group Countries

Authors:

Hubert Paluš, Ján Parobek, Branko Liker

Keywords:

trade performance; competitiveness; wood products; Visegrad group

Volume 65 (2014), Issue 3

Variation in Mechanical Properties within Individual Annual Rings in the Resonance Spruce Wood (Picea abies (L.) Karst.)

Authors:

Waldemar Moliński, Edward Roszyk, Jakub Puszyński

Keywords:

resonance wood; spruce wood; specific modulus of elasticity; specific tensile strength; MFA

Volume 65 (2014), Issue 2

Properties of Liquid and Polycondensed UF Resin Modified with pMDI

Authors:

Dorota Dziurka, Radosław Mirski

Keywords:

UF; pMDI; hybrid resin; FTIR; hydrophobicity

Volume 65 (2014), Issue 2

Influence of Various Wood Species and Cross-Sections on Strength of a Dowel Welding Joint

Authors:

Ivica Župčić, Zoran Vlaović, Danijela Domljan, Ivica Grbac

Keywords:

welding of wood; dowel joints; withdrawal strength; embedded force; wood species; anatomical orientation

Volume 65 (2014), Issue 2

Effectiveness of Asymmetrical Veneering with Hardwood Species of Varying Shrinkage and Porosity

Authors:

Sylwia Olenska, Pawel Tarcicki, Mariusz L. Mamiński, Piotr Beer

Keywords:

asymmetrical veneering; wood-based panels; deformations; shrinkage; porosity

Volume 65 (2014), Issue 1

Influence of the Sawing Method on Yield of Beech Logs with Red Heartwood

Authors:

Ranko Popadić, Borislav Šoškić, Goran Milić, Nebojša Todorović, Mladen Furtula

Keywords:

beech; sawmill processing; methods of sawing; yield; red heartwood

Volume 65 (2014), Issue 1

Analysis of Human Needs in Kitchen Design for People with Visual Impairment

Authors:

Robert Kłos, Beata Fabisiak, Michał Kaczmarek

Keywords:

kitchen furniture; design for elderly people; visual impairment

Volume 64 (2013), Issue 2

Evaluation of Mechanical Properties and Formaldehyde Emission of Plywood Manufactured for Construction Applications

Authors:

Mohamed Z. M. Salem, Martin Böhm, Jaromír Srba

Keywords:

mechanical properties; formaldehyde emission; beech plywood; European small-scale chamber; gas analysis

Volume 64 (2013), Issue 3

Shape Stability of Particleboards Covered with Decorative Veneers

Authors:

Pavel Král, Jaroslav Hrázský, Lenka Hrapková, Petr Hamšík

Keywords:

veneer; veneering; panels; warping; shape stability

Volume 63 (2012), Issue 2

Convective Drying of Beech Lumber without Color Changes of Wood

Authors:

Ladislav Dzurenda, Nencho Deliiski

Keywords:

beech lumber; convective drying; regime of drying; color of wood

Volume 63 (2012), Issue 2

Shrinkage of Grand Fir Wood and its Variability within the Stem

Authors:

Jiří Lukášek, Aleš Zeidler, Štefan Barcík

Keywords:

Grand fir (Abies grandis /Douglas/ Lindl.); shrinkage; density; introduced species; variability

Volume 63 (2012), Issue 1

Economical Wood Sawing with Circular Saw Blades of a New Design

Authors:

Roman Wasielewski, Kazimierz A. Orlowski, Stanislaw Szyszkowski

Keywords:

rip sawing; circular saw blade; increased yield of raw material

Volume 62 (2011), Issue 4

Accelerated Weathering of Coated and Uncoated Beech Wood Modified with Citric Acid

Authors:

Josip Miklečić, Vlatka Jirouš-Rajković

Keywords:

chemical modification; citric acid; QUV weathering; wood stain; beech wood

Volume 62 (2011), Issue 3

Formaldehyde Emission from Wood-Based Panels Bonded with Different Formaldehyde-Based Resins

Authors:

Mohamed Z. M. Salem, Martin Böhm, Štefan Barcík, Jitka Beránková

Keywords:

formaldehyde emission; formaldehyde-based resins; wood-based panels; chamber method; gas analysis method

Volume 62 (2011), Issue 3

Comparing of Employees Motivation Level in Enterprises of Wood Working Industry with other Manufacturing Enterprises in Slovak Republic

Authors:

Miloš Hitka, Lenka Štípalová

Keywords:

Employee motivation; motivational program; methods of motivation analysis

Volume 62 (2011), Issue 3

Determining the Characteristics of Composite Structure Laminae by Optical 3D Measurement of Deformation with Numerical Analysis

Authors:

Biserka Nestorović, Dušan Skakić, Ivica Grbac

Keywords:

optical 3D measurement; chair; shell; composite; material constants; stress; beech wood; finite elements

Volume 62 (2011), Issue 1

Impact of Resin Content on Swelling Pressure of Three Layer Perticleboard Bonded with Urea-Formaldehyde Adhesive

Authors:

Sergej Medved, Alan Antonović, Vladimir Jambreković

Keywords:

particleboards; resin content; swelling; swelling pressure

Volume 62 (2011), Issue 1

Establishment and Development of Croatian Quality Control System for Wood-Based Panels in Accordance with European Technical Regulations

Authors:

Vladimir Jambreković, Jaroslav Kljak, Nikola Španić, Miljenko Klarić

Keywords:

wood-based panels; quality control; TC 89; technical regulation; European standards

Volume 61 (2010), Issue 1

Influence of Urea-Formaldehyde Resin Modification with Liquefied Wood on Particleboard Properties

Authors:

Alan Antonović, Vladimir Jambreković, Jaroslav Kljak, Nikola Španić, Sergej Medved

Keywords:

liquefied wood (LW); composite materials; urea-formaldehyde (UF) resin modification; liquefied wood-formaldehyde (LWF) resin

Volume 59 (2008), Issue 4

Hollow wooden post and its interaction with metal structural members

Authors:

Juraj Detvaj, Filip Argay, Daniel Ruman

Keywords:

wooden post; bearing members; structural members; spruce timber

Volume 59 (2008), Issue 1

Ecological issues of byproducts in hydrothermal wood processing

Authors:

Stjepan Pervan, Goran Draščić, Alan Antonović

Keywords:

hydrothermal wood processing; atmospheric emission; condensate; chemical constituents

Volume 58 (2007), Issue 4

Production management within the concept of digital enterprises of wood-processing and furniture production

Authors:

Gordana Matičević, Tadija Lovrić

Keywords:

wood processing; furniture production; production management system; integrated information systems; ERP system; digital enterprise

Volume 56 (2005), Issue 4

Cut layer of a circular saw with radial run-out of cutting edges

Authors:

Roman Wasielewski, Tomasz Walkowiak

Keywords:

wood cutting; circular saw; radial run-out

Volume 55 (2004), Issue 1

Emission of NO2 from the combustion process of wet wood and bark

Authors:

Ladislav Dzurenda

Keywords:

phytomass; nitrogen; combustion; exhaust gases; concentration of NO2

Volume 54 (2003), Issue 4

Modification of wood with dimethyloldihydroxyethylenurea

Authors:

Miro Tomažič, Borut Kričej, Matjaž Pavlič, Marko Petrič

Keywords:

dimethyloldihydroxyethylenurea DMDHEU; modified wood; properties

Volume 54 (2003), Issue 2

Council directive on limitation of emissions of volatile organic compounds in wood finishing

Authors:

Vlatka Jirouš-Rajković

Keywords:

wood finishing; volatile organic compounds; compliant coatings; VOC - directive

Volume 52 (2001), Issue 3

Leaching of copper from wood treated with copper-based wood preservatives

Authors:

Miha Humar, Marko Petrič, Franc Pohleven

Keywords:

copper based wood preservatives; copper leaching; copper(ll) octanoate; copper(II) sulphate; ethanolamine

Volume 51 (2000), Issue 4

Adhesion of water-borne acrylic and hybrid paint on wood treated with primers

Authors:

Hrvoje Turkulin, Klaus Richter, Jürgen Sell

Keywords:

spruce; durability; adhesion; primers; water-borne paints; hybrid paints; SEM microscopy

Volume 49 (1998), Issue 4

Production of wooden plates with a straight slide cutting

Authors:

Otto Leible

Keywords:

Volume 49 (1998), Issue 1

Correlation between physical properties of V 20 particle boards made with different kinds and quantities of hydrophobic additives

Authors:

Vladimir Jambreković, Mladen Brezović, Vladimir Bruči

Keywords:

swelling; water adsorption; density; paraffin emulsion; V 20 type particle boards; carbamide-formaldehyde resins

Volume 47 (1996), Issue 2

Accelerated Aging of Low-Density Cement-Bonded Wood Composites Made Conventionally and With Carbon Dioxide Injection

Authors:

Robert L. Geimer, Mário Rabelo de Souza, Ali A. Moslemi

Keywords:

excelsior board; mineral board; cement; carbon dioxide; durability; cyclic test; accelerated aging; sodium silicate

Volume 47 (1996), Issue 2

Improving the Glued Joint Strength by Modifying the Beechwood (Fagus sylvatica L) with Gamma Rays

Authors:

Andrija Bogner, Boris Ljuljka, Ivica Grbac

Keywords:

gamma rays irradiated beechwood; wetting angle; glued joint strength

Volume 47 (1996), Issue 1

The influence of circular saw natural frequency and excited frequency on the noise emission

Authors:

Vlado Goglia, Ružica Beljo Lučić

Keywords:

circular saw; natural frequency; noise emission; damping characteristics

Volume 45 (1994), Issue 1

Research on the uniformity of air velocity distribution within timber stack in chamber kiln during drying process

Authors:

Z. Pavlin, Stjepan Pervan

Keywords:

wood drying; air flow uniformity; overhead fan kiln system

Volume 45 (1994), Issue 1

Water-based lacquers

Authors:

Boris Ljuljka, Vlatka Jirouš-Rajković

Keywords:

water-based lacquer; ecology; recycling; overspray

Volume 43 (1992), Issue 3

Gluing of fir with lignin-based adhesives using the conventional and the RF-method

Authors:

Andrija Bogner, Vlatka Jirouš-Rajković, Vladimir Sertić, Hrvoje Turkulin

Keywords:

gluing of fir; lignin based adhesives; intensification of adhesive; curing by conduction and RF energy

Volume 43 (1992), Issue 3

Relation between emission formaldehyd value from MDF-boards determinated by perforation and diffusion method

Authors:

Đurđica Trninić, Vladimir Jambreković, Damir Žuntar

Keywords:

MDF-boards E 1 class; free formaldehyde emission; perforator and WKI-24 method

Volume 42 (1991), Issue 3-4

The yield of sawlogs with the special view upon certain elements of sawing quality

Authors:

Ružica Beljo Lučić

Keywords:

yield of sawlogs; accuracy of sawing; roughness of the sawn surface

Volume 41 (1990), Issue 5-6

Application of lignosulfonates combined with various urea-formaldehyde resins

Authors:

L. Suša, D. Budin, F. Hvala

Keywords:

lignosulfonates; urea-formaldehyde resins; adhesives; particle boards; mechanical properties

Volume 40 (1989), Issue 5-6

Surface finishing of wood and ecological problems

Authors:

Milan Jaić

Keywords:

surface finishing; ecological problems; lacquers with reduced emission; choice of lacquering systems

Volume 40 (1989), Issue 5-6

Wood finishing requires modern means

Authors:

Branko Knethl

Keywords:

wood finishing; application of stains and lacquers

Volume 40 (1989), Issue 7-8

Producing veneer of oak (quercus robur erch) by pyramidal cutting

Authors:

Franjo Penzar

Keywords:

oak wood; pyramidal cut; cutting with standard equipment; peeling-machine.

Volume 40 (1989), Issue 9-10

Formaldehyde liberation during the manufacture and storage of composition materials

Authors:

Jadranko Jahić, Vladimir Bruči

Keywords:

free formaldehyde; reduced formaldehyde emission; formaldehyde source interaction

Volume 39 (1988), Issue 3-4

Cognitions on determination of air contamination degree by formaldehyde

Authors:

Salah-Eldien Omer

Keywords:

position of regulations linked to formaldehyde; The Hoetjer's equation; chamber for determination of formaldehyde emission

Volume 38 (1987), Issue 3-4

Bonding of beech and fir wood by activating the joint surface with natrium hydroxide applying the lignin based fillers

Authors:

Andrija Bogner, Hrvoje Turkulin, Vladimir Sertić, Boris Ljuljka

Keywords:

activation of wood surface with natrium hydroxide; lignin based filler; bonding of solid beech and fir

Volume 38 (1987), Issue 5-6

Product improvement with regards to the amount of formaldehyde subsequently emitted

Authors:

Vladimir Bruči, Mladen Komac, Marina Tatalović, Jadranko Jahić

Keywords:

formaldehyde emission; formaldehyde concentration; molar ration

Volume 38 (1987), Issue 7-8

Influence of terrain factors on merchantable timber skidding effects with frame steered skidder

Authors:

Stevan Bojanin

Keywords:

merchantable timber; wood skidding; frame steered skidder; tree-length system; assortment system; inclination of the slope; terrain condition; skidding speed; travelling empty; travelling loaded; skidding distance; fixed time; variable time; effective time; trip; standard time; daily output

Volume 38 (1987), Issue 11-12

Optimization of operation mode on wood working machines with a constant main cutting speed

Authors:

Vlado Goglia

Keywords:

cutting process; mathematical model of function criterion of optimization

Volume 37 (1986), Issue 5-6

Emission of formaldehyde from unimproved and improved particle boards

Authors:

Mladen Komac, Marina Tatalović, Vladimir Bruči

Keywords:

free formaldehyde; emission classes; perforation method; diffusion method

Volume 37 (1986), Issue 5-6

Glueing with waterproof synthetic glues

Authors:

Stjepan Petrović, Zora Smolčić-Žerdik

Keywords:

water resistant synthetic glues; glueing quality