Archive | Drvna Industrija Journal

Volume 64 (2013), Issue 4

Performance of Native and Copper-Ethanolamine-Treated Wood Exposed to Seawater at Port of Koper, Slovenia

Authors:

Miha Humar, Boštjan Lesar

Keywords:

marine borers; Limnoria sp.;Teredo sp.; EN 275; cooper based preservative; Adriatic Sea

Volume 74 (2023), Issue 1

Boron Compounds-Added Kraft Pulping from Scots Pine

Authors:

Suleyman Kustas, Sezgin Koray Gülsoy

Keywords:

Pinus sylvestris; pulp yield; boron compounds; pulp strength

Volume 74 (2023), Issue 1

Utilization of Scots Pine (Pinus sylvestris L.) Timber with Defects in Production of Engineered Wood Products

Authors:

Daniel Koynov, Miglena Valyova, Emiliyan Parzhov, Lee Seng Hua

Keywords:

Pinus sylvestris L.; engineered wood; knots; cross-laminated timber (CLT); solid wood panels

Volume 73 (2022), Issue 4

Fracture Behavior of Wood Under Mode I Loading in Tangential Direction

Authors:

Arif Caglar Konukcu

Keywords:

fracture; fracture toughness; southern yellow pine; red oak; specific fracture energy

Volume 73 (2022), Issue 3

Withdrawal Resistance of T-Nuts in Various Furniture Materials

Authors:

Ewa Skorupińska, Krzysztof Wiaderek, Maciej Sydor

Keywords:

T-nut; pinewood; oriented strand board; plywood; particleboard; furniture materials

Volume 73 (2022), Issue 3

Feed Cutting Force Component in Up and Down Sawing of Pine

Authors:

Ľubomír Javorek, Richard Kminiak, Mária Vargovská, Etele Csanády, Szabolcs Németh

Keywords:

pine wood; sawing; feed speed; rake angle; teeth number; feed force

Volume 73 (2022), Issue 3

Analyses of Shear Angle in Orthogonal Cutting of Pine Wood

Authors:

Kazimierz A. Orlowski, Daniel Chuchala, Gerhard Sinn

Keywords:

shear angle; orthogonal cutting; chip compression ratio; pine wood; fracture toughness

Volume 73 (2022), Issue 3

Quality and Dimensional Parameters of Large-Sized Pine Timber in View of Expectations of Polish Sawmill Industry

Authors:

Marek Wieruszewski, Zbigniew Malinowski, Radosław Mirski

Keywords:

scots pine; large-size wood; classification; wood defects; market preferences

Volume 73 (2022), Issue 4

Safety Stresses of Red Pine Wood According to Site Index Grade

Authors:

İbrahim Bektaş

Keywords:

red pine; site index; mechanical properties; safety stress; safety coefficient

Volume 73 (2022), Issue 4

Prediction of Optimum Expanded Polystyrene Densities for Best Thermal Insulation Performances of Polystyrene Composite Particleboards by Using Artificial Neural Network

Authors:

Hasan Ozturk, Aydin Demir, Cenk Demirkir

Keywords:

polystyrene composite particleboard; thermal insulation; thermal conductivity; EPS; ANN

Volume 73 (2022), Issue 2

Composition of Essential Oils in Needles and Barks of Turkish Red Pine (Pinus brutia Ten.) Infested by Marchalina hellenica Genn.

Authors:

Mustafa Burak Arslan, Selçuk Küçükaydin, Meltem Taş-Küçükaydin, Mehmet Emin Duru, Halil Turgut Şahin

Keywords:

Marchalina hellenica, Pinus brutia, essential oils, GC-MS, needles, bark

Volume 73 (2022), Issue 4

Combustion and Decay Resistance Performance of Scots Pine Treated with Boron and Copper Based Wood Preservatives

Authors:

Sedat Sürdem, Cihan Eseroglu, Serhat Yildiz, Cevdet Sögütlü, Abdulkerim Yörükoglu

Keywords:

wood preservatives; decay resistance; boron compounds; combustion resistance filler

Volume 73 (2022), Issue 4

Effects of Exposure Time and Temperature on Screw Driving Torques in Heat-Treated Anatolian Black Pine and Sessile Oak Wood

Authors:

Mehmet Karamanoglu, Önder Tor

Keywords:

screw; pilot hole; seating torque; heat-treated wood

Volume 73 (2022), Issue 4

Identification of Defective Joints in Beams via Torsional Vibration

Authors:

Mostafa Kohantorabi, Alireza Asgari, Mona Shayestehkia, Mobina Kohantorabi

Keywords:

joint; prediction; defect; torsional vibration; beech; adhesive

Volume 73 (2022), Issue 4

Effects of Silane Treatment on Physical and Mechanical Properties of Particleboards Prepared with Urea Formaldehyde

Authors:

Saadettin Murat Onat, Orhan Kelleci

Keywords:

silane; particleboard; physical and mechanical properties

Volume 72 (2021), Issue 2

Chemical and Structural Characterization of Poplar and Black Pine Wood Exposed to Short Thermal Modification

Authors:

Vasiliki Kamperidou

Keywords:

cellulose; chemical composition; FTIR; lignin; thermal treatment; wood

Volume 72 (2021), Issue 3

Performance of ANN in Predicting Internal Bonding of Cement Particleboard Manufactured from Giant Reed and Bagasse

Authors:

Morteza Nazerian, Hossin Assadolahpoor Nanaii, Elham Vatankhah, Mojtaba Koosha

Keywords:

cement-bonded particleboard; nanosilica; internal bonding; hydration; ANN

Volume 72 (2021), Issue 3

First and Second Phase of Human Centered Design Method in Design of Exterior Seating Furniture

Authors:

Sarah Szökeová, Lukáš Fictum, Milan Šimek, Alena Sobotkova, Marek Hrabec, Danijela Domljan

Keywords:

exterior furniture; human centered design; wood; user research; market research; furniture design

Volume 72 (2021), Issue 4

Decay Resistance and Color Change of Pine and Beech Wood Impregnated with R. Luteum and R. Ponticum Plant Extracts

Authors:

Huseyin Pelit, Ali Alkan, Mesut Yalçın

Keywords:

color change; decay resistance; impregnation; natural extract; wood material

Volume 72 (2021), Issue 4

Biodegradation and Micro- Scale Treatability Pattern of Loblolly Pine Heartwood Bioincised by Bacillus Subtilis and Physisporinus Vitreus

Authors:

Ismaeil Zahedi Tajrishi, Asghar Tarmian, Reza Oladi, Miha Humar, Masoud Ahmadzadeh

Keywords:

Bacillus subtilis; bioincising; penetration; Physisporinus vitreus; wood treatability

Volume 71 (2020), Issue 4

Some Properties of Eastern Red Cedar (Juniperus Virginiana L.) Particleboard Panels Made Using Modified Starch as Binder

Authors:

Onur Ulker, Salim Hiziroglu

Keywords:

particleboard; green adhesive; starch; mechanical properties; physical properties

Volume 71 (2020), Issue 3

Characterization of Engineering Elastic Parameters of Oriented Strand Board (OSB) Manufactured from Poplar (Populus deltoides) Strands Using Ultrasonic Contact Pulse Transmission

Authors:

Meysam Zahedi, Saeed Kazemi Najafi, Josef Füssl, Majid Elyasi

Keywords:

poplar (Populus deltoides); oriented strand bord; engineering parameters; ultrasonic waves

Volume 71 (2020), Issue 3

Strength Investigation of an Upholstered Furniture Frame with Side Plates of PB, OSB and PLY by Finite Element Method

Authors:

Nelly Staneva, Yancho Genchev, Desislava Hristodorova

Keywords:

strength; upholstered furniture frame; particleboard; oriented strand board; plywood; CAE/FEM

Volume 71 (2020), Issue 2

Characterisation and Modelling of Drying Kinetics of Thin Ash and Oak Wood Lamellas Dried with Infrared Radiation and Hot Air

Authors:

Aleš Straže, Miljenko Klarić, Zlatko Budrović, Stjepan Pervan

Keywords:

wood drying kinetics; hot air drying; infrared drying; moisture diffusion

Volume 71 (2020), Issue 1

Pine Wood Particles Pyrolysis and Radiographic Analysis

Authors:

Paweł Kazimierski, Sara Vieira, Dariusz Kardaś

Keywords:

pyrolysis; biomass; thermogravimetric analysis; radiography; heat transfer

Volume 70 (2019), Issue 3

Influence of Air Humidity Variation on Strength of Rotary Welded Dowel Joints of Pinewood

Authors:

Ivan Žulj, Ivica Župčić, Ivica Grbac

Keywords:

welding solid wood; Scots pine (Pinus sylvestris L.); dowels; strength of welded joints; weld factors; embedded force; the impact of humidity on wood; wood moisture content

Volume 70 (2019), Issue 2

Effect of Pine (Pinus Sylvestris) Bark Dust on Particleboard Thickness Swelling and Internal Bond

Authors:

Sergej Medved, Eugenia Mariana Tudor, Marius Catalin Barbu, Vladimir Jambreković, Nikola Španić

Keywords:

bark dust; particleboard; thickness swelling; water absorption; internal bond

Volume 70 (2019), Issue 2

Modeling Latent Heat Fluxes of Water in Logs during their Freezing

Authors:

Nencho Deliiski, Natalia Tumbarkova

Keywords:

2D mathematical model; pine logs; freezing; latent heat sources; free water; bound water

Volume 70 (2019), Issue 1

Comparison of Surface Quality and Tool-Life of Glulam Window Elements after Planing

Authors:

Michal Dobrzynski, Kazimierz A. Orlowski, Michal Biskup

Keywords:

planing process; pine wood; window frame; surface quality; 2D/3D surface texture

Volume 70 (2019), Issue 1

Influence of Finishing Materials on Viscous Elastic Properties of Wooden Structures

Authors:

Darius Albrektas, Elvyra Revuckaitė, Vaida Dobilaitė, Milda Jucienė

Keywords:

oak wood; pine wood; modulus of elasticity; damping coefficient; finishing materials; pentaftal varnish; wood oil

Volume 70 (2019), Issue 4

The Effect of Using Alum Mordant in Wild Cherry Bark Dyestuff for the Production of UV Resistant Colored Paper

Authors:

Ayhan Gençer, Ahmet Can, Aysun Mustak, Ülkü Burcu Gitti

Keywords:

wild cherry bark; chemical-thermomechanical pulp (CTMP); alum; weathering

Volume 70 (2019), Issue 4

Effect of Accelerated Weathering Test on Selected Properties of Bamboo, Scots Pine and Oriental Beech Wood Treated with Waterborne Preservatives

Authors:

Elif Topaloğlu

Keywords:

accelerated weathering; bamboo; mechanical properties; waterborne preservative; wood

Volume 70 (2019), Issue 4

Influence of Layered Structure of Composite Timber Floor Boards on Their Hardness

Authors:

Piotr Borysiuk, Izabela Burawska-Kupniewska, Radosław Auriga, Grzegorz Kowaluk, Paweł Kozakiewicz, Marcin Zbieć

Keywords:

veneer; composite; flooring material; knotholes; hardness

Volume 70 (2019), Issue 3

Application of Artificial Neural Network to Predict the Effect of Paraffin Addition on Water Absorption and Thickness Swelling of MDF

Authors:

Ayşenur Gürgen, Derya Ustaömer, Sibel Yildiz

Keywords:

artificial neural network; water absorption; thickness swelling; medium density fiberboard; paraffin

Volume 70 (2019), Issue 3

Estimating Modulus of Elasticity (MOE) of Particleboards Using Artificial Neural Networks to Reduce Quality Measurements and Costs

Authors:

Rıfat Kurt, Selman Karayilmazlar

Keywords:

estimate; modulus of elasticity; particleboard; ANN

Volume 69 (2018), Issue 4

Influence of Nano-Silica (SiO2) Content on Mechanical Properties of Cement-Bonded Particleboard Manufactured from Lignocellulosic Materials

Authors:

Morteza Nazerian, Hossin Assadolahpoor Nanaii, Mohebbi Gargarii Rahiim

Keywords:

cement-bonded particleboard; Nano-Silica; reed; bagasse; hydration; RSM

Volume 69 (2018), Issue 3

Effects of Catalysts on Modulus of Rupture and Chemical Structure of Heat – Treated Wood

Authors:

Ayhan Ozcifci, Erkan Sami Kokten, Nadir Ayrilmis, Günay Özbay, Suat Altun

Keywords:

heat treatment; Scotch pine; mechanical strength; catalyst; chemical properties

Volume 69 (2018), Issue 3

Susceptibility of Thermo-Mechanically Modified Scots Pine (Pinus Sylvestris L.) Sapwood and Heartwood to Colour Change under the Influence of Ultraviolet Radiation

Authors:

Agnieszka Laskowska

Keywords:

colour; densification; heartwood; sapwood; Scots pine; thermo-mechanical modification

Volume 69 (2018), Issue 2

Mechanical Properties and Formaldehyde Release of Boards Manufactured with Hygrothermally Treated Tepa (Laureliopsis Philippiana Looser) Particles

Authors:

Rommel Crespo Gutiérrez, Luis Valenzuela, Hernán Wilson

Keywords:

Particleboard; hygrothermal treatment; Laureliopsis philippiana; urea-formaldehyde; particle geometry; mechanical properties; formaldehyde release Hrčak ID: 202891

Volume 69 (2018), Issue 2

Formaldehyde Release from Plywood Manufactured with Two Types of Urea Formaldehyde Resins after Fire Retardant Treatment of Veneers

Authors:

Aydin Demir, Ismail Aydin, Hasan Ozturk

Keywords:

formaldehyde release; plywood; veneer; fire retardant; urea formaldehyde

Volume 68 (2017), Issue 4

Influence of Some Boron Compounds on Kraft Pulping of European Black Pine and European Aspen

Authors:

Ayben Kilic Pekgözlü, Sezgin Koray Gülsoy, Andrey Pranovich

Keywords:

Boron; Kraft pulping; European black pine; European aspen; Paper strength; Hemicelluloses

Volume 68 (2017), Issue 2

Physical, Mechanical and Bonding Performance of Calabrian Pine (Pinus brutia Ten.) as Influenced by Heat Treatment

Authors:

Ergün Güntekin, Tuğba Yilmaz Aydin, Birol Üner

Keywords:

Calabrian pine; heat treatment; mechanical properties; bonding

Volume 68 (2017), Issue 2

Micro-Tensile and Compression Strength of Scots Pine Wood and Comparison with Standard-Size Test Results

Authors:

Ümit Büyüksarı, Nusret As, Türker Dündar, Ezel Sayan

Keywords:

micro-sized specimens; standard-sized specimens; tensile strength; compression strength

Volume 68 (2017), Issue 2

An Evaluation of Modulus of Elasticity, Dimensional Stability and Bonding Strength of Bonded Heat-Treated Wood

Authors:

Darius Albrektas, Povilas Navickas

Keywords:

heat-treated wood; pine; spruce;mechanical properties; nondestructive evaluation method; three point static bending; bonding

Volume 68 (2017), Issue 2

Simulation Model for Prediction of Timber Assortment Price Trends in Croatia - a Case Study of Brinje Forest Office

Authors:

Karlo Beljan, Stjepan Posavec, Silvije Orsag, Krunoslav Teslak

Keywords:

timber assortment price; price fluctuations; Monte Carlo simulation

Volume 68 (2017), Issue 2

Measuring the Formaldehyde Content from Different Types of Oriented Strand Board Manufactured with Different Thicknesses and Glued with Different Resins

Authors:

Mohamed Z. M. Salem, Martin Böhm, Ramadan Nasser

Keywords:

construction panels; formaldehyde content; green products; OSB

Volume 68 (2017), Issue 1

Chemical and Physical Properties of Pine Wood during Pyrolysis

Authors:

Karol Ronewicz, Jacek Kluska, Łukasz Heda, Dariusz Kardaś

Keywords:

pyrolysis; pine wood; wood permeability; wood density; pyrolysis gas; thermogravimetric analysis

Volume 68 (2017), Issue 1

Determination of Screw Withdrawal Resistance of Some Heat-Treated Wood Species

Authors:

Osman Perçin, Şekip Şadiye Yasar, Mustafa Altunok, Oğuzhan Uzun

Keywords:

heat treatment; black pine; hornbeam; Uludağ fir; screw withdrawal resistance

Volume 67 (2016), Issue 1

The Effects of Poly(vinyl acetate) Filled with Nanoclay and Cellulose Nanofibrils on Adhesion Strength of Poplar and Scots Pine Wood

Authors:

Deniz Aydemir, Gokhan Gunduz, Nejla Aşık, Alice Wang

Keywords:

Poly(vinyl acetate); cellulose nanofibrils (CNFs); nano clay (NC); nanoparticles filled composites; adhesion

Volume 67 (2016), Issue 4

The Effect of Altitude Difference on Physical and Mechanical Properties of Scots Pine Wood Grown in Turkey - Sinop Province

Authors:

Bulent Kaygin, Semih Esnaf, Deniz Aydemir

Keywords:

Scots pine (Pinus sylvestris L.); altitude difference; site; physical properties of wood; mechanical properties of wood

Volume 67 (2016), Issue 3

Cutting Power during Milling of Thermally Modified Pine Wood

Authors:

Andrzej Krauss, Magdalena Piernik, Grzegorz Pinkowski

Keywords:

woodworking; thermal modification; cutting; lengthwise milling; power consumption; softwood; Pinus sylvestris L

Volume 67 (2016), Issue 3

Physical Properties of Boards Manufactured with Hygrothermally Treated Tepa (Laureliopsis Philippiana Looser) Particles

Authors:

Rommel Crespo Gutiérrez, Luis Valenzuela, Hernán Wilson

Keywords:

Particleboard; hygrothermal treatment; Laureliopsis philippiana; physical properties; dimensional stability

Volume 66 (2015), Issue 4

Application of Reduced Stiffness of Complex Laminate in Finite Elements for Chair Analysis

Authors:

Biserka Nestorović, Ivica Grbac, Predrag Nestorović, Jelena Milošević

Keywords:

reduced stiffness; finite elements; composite; material constants; shell; chair

Volume 66 (2015), Issue 4

Modeling of Compressive Strength Parallel to Grain of Heat Treated Scotch Pine (Pinus sylvestris L.) Wood by Using Artificial Neural Network

Authors:

Fatih Yapici, Raşit Esen, Okan Erkaymaz, Hasan Baş

Keywords:

wood; heat treatment; Artificial Neural Network; compressive strength

Volume 66 (2015), Issue 1

Tests of Wooden Specimens from Scots Pine (Pinus sylvestris) with the Help of Anisotropic Plasticity Material Model

Authors:

Jan Pěnčík

Keywords:

Scots pine (Pinus sylvestris); FEA; numerical modelling; elastic constants; material constants; anisotropic plasticity

Volume 66 (2015), Issue 1

Mineralized Wood Particle Reinforced Concrete as Stiffening Elements with Reduced Density

Authors:

Fabian Wulf, Karsten Schulz, Lukas Brösel, Alexander Pfriem

Keywords:

wood concrete compound; mineralization; compressive strength

Volume 65 (2014), Issue 4

Effect of Temperature on Radial Growth of Beech and Pine Saplings in the First and Second Year of the Experiment: a Comparison

Authors:

Jožica Gričar

Keywords:

Fagus sylvatica; Pinus sylvestris; xylem increment; juvenile period; temperature

Volume 65 (2014), Issue 4

Properties of Modified Phenol-Formaldehyde Adhesive for Plywood Panels Manufactured from High Moisture Content Veneer

Authors:

Pavlo Bekhta, Galyna Ortynska, Jan Sedliacik

Keywords:

gluing; veneer; high moisture content; plywood; phenol-formaldehyde resin; modifying agents

Volume 65 (2014), Issue 3

The Effect of Aging on Various Physical and Mechanical Properties of Scotch Pine Wood Used in Construction of Historical Safranbolu Houses

Authors:

Huseyin Yorur, Seref Kurt, Ibrahim Yumrutas

Keywords:

historical Safranbolu houses; historical wood flooring; cultural heritage; density; Brinell hardness; compression strength perpendicular to the grain

Volume 65 (2014), Issue 1

Influence of the Sawing Method on Yield of Beech Logs with Red Heartwood

Authors:

Ranko Popadić, Borislav Šoškić, Goran Milić, Nebojša Todorović, Mladen Furtula

Keywords:

beech; sawmill processing; methods of sawing; yield; red heartwood

Volume 64 (2013), Issue 3

Effect of Seed Source on Physical Properties of Scots Pine (a Case Study in Neka, Iran)

Authors:

Mohammad Farsi, Majid Kiaei, Shahram Miar, Shirzad Mohammadnezhad Kiasari

Keywords:

seed sources; Scots pine; oven-dry density; basic density; volumetric shrinkage; volumetric swelling

Volume 64 (2013), Issue 3

Shape Stability of Particleboards Covered with Decorative Veneers

Authors:

Pavel Král, Jaroslav Hrázský, Lenka Hrapková, Petr Hamšík

Keywords:

veneer; veneering; panels; warping; shape stability

Volume 64 (2013), Issue 2

Evaluation of Mechanical Properties and Formaldehyde Emission of Plywood Manufactured for Construction Applications

Authors:

Mohamed Z. M. Salem, Martin Böhm, Jaromír Srba

Keywords:

mechanical properties; formaldehyde emission; beech plywood; European small-scale chamber; gas analysis

Volume 64 (2013), Issue 2

Natural Durability of Timber Exposed Above Ground – a Survey

Authors:

Christian Brischke, Linda Meyer, Gry Alfredsen, Miha Humar, Lesley Francis, Per-Otto Flæte, Pia Larsson-Brelid

Keywords:

durability classes; field tests; resistance factor; service life prediction; test methodology; use class 3

Volume 64 (2013), Issue 1

Content of Total Phenols in Red Heart and Wound-Associated Wood in Beech (Fagus sylvatica L.)

Authors:

Viljem Vek, Primož Oven, Ida Poljanšek

Keywords:

phenols; spectrophotometry; reaction zone; Folin-Ciocalteu reagent; beech

Volume 63 (2012), Issue 4

Bending Capacity of Middle Joints of Upholstered Furniture Frames

Authors:

Vasiliki Kamperidou, Vasileios Vasileiou

Keywords:

bending moment capacity; corner block joint; dowel joint; gusset plate joint; middle joint; mortise and tenon joint; upholstered furniture frame

Volume 61 (2010), Issue 3

MDF/HDF Production from Plantation Wood Species

Authors:

Tibor Alpár, Tibor Fáczán, István Rácz, Gabor Kátoli

Keywords:

MDF; HDF; wood plantation; Pannonia poplar; I214 poplar; black locust; Austrian pine; fiberboard production; physical aspects of MDF/HDF boards

Volume 61 (2010), Issue 4

UF-pMDI Hybrid Resin for Waterproof Particleboards Manufactured at a Shortened Pressing Time

Authors:

Dorota Dziurka, Radosław Mirski

Keywords:

particleboard; UF resin; pMDI; water resistance; mechanical properties

Volume 60 (2009), Issue 3

Production of cement-bonded particleboards from poplar (Populus euramericana cv. „I 214“)

Authors:

Tibor Alpár, István Rácz

Keywords:

cement-bonded particleboards; calcium-chloride; calcium-formate; poplar; scots pine; water glass

Volume 57 (2006), Issue 3

Reduction of dustiness in sawing wood by universal circular saw

Authors:

Alena Očkajová, Ružica Beljo Lučić, Anka Ozana Čavlović, J. Terenòvá

Keywords:

wood dust; sawing; various type of saw blade; granularity

Volume 56 (2005), Issue 3

Influence of selected factors on granulometric composition of chips in plane milling of juvenile pine wood

Authors:

Štefan Barcík, Eva Pivolusková, Mária Kotlínová

Keywords:

pine wood; juvenile wood; mature wood; plane milling; granulometric analysis

Volume 55 (2004), Issue 4

Modeling and automatic control of heat energy consumption required for thermal treatment of logs

Authors:

Nencho Deliiski

Keywords:

heat energy; mathematical model; automatic control; thermal conductivity; FORTRAN; logs

Volume 55 (2004), Issue 2

Redwood of beech (Fagus Silvatica L.) - the advantage in rational production and use

Authors:

Silvana Prekrat, Ivica Župčić, Josip Ištvanić

Keywords:

Defect of wood; beech wood; false heartwood; utilisation of beech wood

Volume 48 (1997), Issue 4

Testing the strength of beech (Fagus sylvatica L.) and pine corner joints (Pinus sylvestris L.)

Authors:

Ivica Grbac, Stjepan Tkalec, Želimir Ivelić

Keywords:

joint fittings; static load strength; beech and pine furniture

Volume 48 (1997), Issue 1

Strength of joints in chairs made of beech and pine

Authors:

Stjepan Tkalec, Silvana Prekrat

Keywords:

technical design; chair structure; glued wood joints; joint strength

Volume 45 (1994), Issue 1

Upholstered furniture flammability

Authors:

Ivica Grbac, Boris Ljuljka

Keywords:

flammability of upholstered furniture; flammability testing; fabric treatment; live (smouldering) cigarette

Volume 43 (1992), Issue 3

The effect of sanding on the roughness of stained and lacquered wood surfaces

Authors:

Trajče Manev

Keywords:

sanding; grif size; surface roughness

Volume 41 (1990), Issue 9-10

Research on change of fire resistance of steel galvanized metal sheet doors after being veneered on both surfaces

Authors:

Mirko Gornik

Keywords:

fire resistance; veneer paneling; glued joints

Volume 40 (1989), Issue 5-6

Surface finishing of wood and ecological problems

Authors:

Milan Jaić

Keywords:

surface finishing; ecological problems; lacquers with reduced emission; choice of lacquering systems

Volume 40 (1989), Issue 9-10

Formaldehyde liberation during the manufacture and storage of composition materials

Authors:

Jadranko Jahić, Vladimir Bruči

Keywords:

free formaldehyde; reduced formaldehyde emission; formaldehyde source interaction

Volume 40 (1989), Issue 1-2

Investigations of some physical properties of black pine wood from the forest area »Konjuh« Živinice

Authors:

Novak Krstajić

Keywords:

black pine; physical properties; sawn logs; thin roundwood

Volume 40 (1989), Issue 11-12

Present situation in primary conversion and finalization and problems of further development of timber conversion in »Bilokalnik« Koprivnica

Authors:

Nevenko Petruša

Keywords:

utilization of sawn timber; secondary conversion; sale of workpieces manufactured in the mill

Volume 39 (1988), Issue 9-10

Shrinkage and overmeasure of fir-wood boards

Authors:

Mirko Ilić

Keywords:

fir-wood; shrinkage of lab tests; shrinkage of wood assortments; required overmeasure

Volume 39 (1988), Issue 9-10

Contribution to investigation of time required for performance on a log band saw

Authors:

Ivan Aleksov, Milan Vukićević

Keywords:

log band paw; time of log conversion; correlation; log diameter; number of cuts per log; log volume

Volume 39 (1988), Issue 5-6

Reduction of extreme stresses on band-saw blades through regulation of the cross-alignment angle of the pulleys

Authors:

Mario Štambuk

Keywords:

band-saw; band-saw blade; cross-aligning of band-saw pulleys; reduction of extreme stresses in band-saw blades

Volume 38 (1987), Issue 5-6

Comparative yield of thin logs into furniture dimension stock

Authors:

Novak Krstajić

Keywords:

pinewood; dimension stock; yield

Volume 38 (1987), Issue 5-6

Water-soluble polysaccharides of bleached kraft (pine) pulp

Authors:

Awad El-Karim Salah S.

Keywords:

pulp; polysaccharide; monosaccharide; extraction; beating; pinewood

Volume 38 (1987), Issue 7-8

Influence of terrain factors on merchantable timber skidding effects with frame steered skidder

Authors:

Stevan Bojanin

Keywords:

merchantable timber; wood skidding; frame steered skidder; tree-length system; assortment system; inclination of the slope; terrain condition; skidding speed; travelling empty; travelling loaded; skidding distance; fixed time; variable time; effective time; trip; standard time; daily output

Volume 38 (1987), Issue 11-12

Shrinkage and oversizes of beech boards

Authors:

Mirko Ilić

Keywords:

beech-wood; shrinkage on small lab test pieces; shrinkage on boards; required oversizes

Volume 38 (1987), Issue 11-12

Water soluble polysaccharides of bleached kraft (pine) pulp - Part 2. Degree of polymerization and adsorption

Authors:

Awad El-Karim Salah S.

Keywords:

pulp; polysaccharide; degree of polymerization; adsorption; extraction; viscosity